Skip to content

AFI Cashew Kernel Specification

The AFI cashew specification is a US trade rule set for cashew kernels. It defines quality classes, sizes, defect limits and testing. Buyers should name the class as well as the size.

Current text
2023
Quality classes
6
Moisture range
3–5%

The AFI cashew kernel specification is the US trade rule set for cashew kernels from the Association of Food Industries (AFI). It names the quality class, shape, size, defect limits and lab checks for each cashew lot shipped to the United States. Traders also call it the AFI cashew standard, and a quote that reads “W320, AFI First Quality Fancy” points to it. The current text dates from September 2023. Size codes such as W320 appear on the cashew grades chart.

Who writes the AFI cashew rules

AFI is a US trade group for food imports, active since 1906. Its members include overseas producers and US and Canadian importers. The Nut and Agricultural Products Section of AFI adopted the current cashew text. AFI posts it as a free PDF on its food standards page.

Quality classes in the AFI cashew rules

AFI sorts cashew kernels into six quality classes from their colour and marks.

AFI class Colours and marks allowed
First Quality Fancy One even colour: white, light yellow or pale ivory
Second Quality Scorched Deep ivory, yellow, light brown, light ivory or light ash-grey
Third Quality Special Scorched Amber, brown, deep yellow, light blue or deep blue; slightly shrivelled or young kernels
Lightly Blemished Wholes Deep ivory, light ivory, light ash-grey or light brown; up to 40% of kernels may show light brown lines
Lightly Blemished Pieces Light brown specks or blemishes on up to 20% of pieces
Dessert Blemished Wholes Deep yellow, brown, amber or blue; dark brown lines, swirls, loops or pitted spots on up to 60% of kernels

Scorch comes from too much heat at shelling or peeling. Pitted spots are small pits, over 1 mm in total, from attack on the nut before harvest. In a W320 First Quality Fancy lot, yellow or light brown kernels count as lower-class kernels, and the defect table below caps them.

Shapes and sizes in the AFI rules

AFI uses four shapes: whole (W), butts (B), splits (S) and pieces. A whole kernel may lose one-eighth of its body at most. A butt is a kernel broken across that holds 3/8 to under 7/8 of its body. Each split is one half of a kernel, broken lengthwise.

Whole kernels come in five sizes. Each size is a count of whole kernels in one pound (454 g).

AFI size Other name Whole kernels per pound
180 SLW 140 to 180
210 LW 180 to 210
240 None 220 to 240
320 None 300 to 320
450 None 400 to 450

A count of 310 whole kernels in 454 g falls in size 320. Sizing is a must for First Quality Fancy and a choice for the other classes.

Pieces have seven sieve sizes. AFI accepts only woven-wire sieves with square holes for pieces.

AFI piece size Pieces pass through Pieces rest on
Large Pieces 8.00 mm 6.30 mm
Mixed Pieces 6.30 mm 4.75 mm
Small Pieces 6.30 mm 2.80 mm
Chips 2.80 mm 2.36 mm
Baby Bits 2.36 mm 1.70 mm
Fine Grains 1.70 mm 1.18 mm
Fines 1.18 mm None

At least 95% of a piece lot must rest on the lower sieve.

Size and breakage limits in an AFI lot

Four limits control the mix inside a lot, each as a share of the weight:

  • Whole kernels of a lower size grade: up to 10%
  • Broken kernels or pieces among whole kernels: up to 10%
  • Pieces among butts and splits: up to 10%
  • Pieces of the next smaller size in a piece grade: up to 5%

In a 10 kg carton of size 320, up to 1 kg may be smaller whole kernels, such as size 450. Broken kernels may make up another 1 kg.

Defect limits for each AFI class

Cashew kernels sorted into colour and quality samples

Table 1 of the AFI text caps defects in four classes, as a share of the sample weight. Serious damage covers insect, rodent or bird filth, visible mould, stale or rancid taste, and decay. It also covers dirt, solder from tin seals, or shell stuck to a kernel. The thin brown skin on a kernel is the testa.

Defect limit (% of weight) First Second Third Light blemish
Serious damage 1.0 2.0 2.0 2.0
Second quality kernels 5.0 No cap No cap No cap
Third quality and light blemish kernels 1.5 5.0 No cap No cap
Dessert kernels 0.5 2.5 7.5 7.5
Scrapes and deep knife cuts 1.0 2.0 5.0 5.0
Testa on the kernel (worst share) 3.0 (1.5) 3.0 (1.5) 3.0 (1.5) 3.0 (1.5)
All defects together 8.0 11.0 14.0 14.0

In a 500 g First Quality Fancy sample, 40 g of faulty kernels reaches the 8.0% total. At 45 g, the lot fails. Light brown lines in Lightly Blemished Wholes count outside the 14.0% total.

Dessert Whole Cashews and other dessert and blemished grades have no total cap. Each such lot must match or beat the sample the buyer approved. Two sealed samples go to the buyer before shipment, and one waits unopened for any quality dispute.

How testers sample an AFI lot

The sampling plan tells testers how many cartons to open. AFI counts a lot in cartons of 22.68 kg (50 lb).

Plan Cartons in the lot Cartons opened
A Under 51 3
B 51 to 350 6
C 351 to 800 13
D 801 to 2,100 21

Testers take about 275 to 500 g from 3 or more spots in each opened carton. The full sample must reach 3,500 g. On a lot of 40 cartons, Plan A opens 3 cartons, and each one must yield about 1,167 g to reach 3,500 g. A recheck, or a lot with past failures, may double the cartons.

From the mixed sample, testers weigh out a portion for each check:

  • breakage: 1,000 g
  • defects: 500 g
  • smaller and larger whole kernels: 500 g
  • kernel count: 454 g of whole kernels
  • piece sizes: 200 g, shaken on the sieves for 2 minutes
  • insects and serious damage: 200 whole kernels or 200 g of broken kernels

Each kernel counts once, for its worst fault.

Shipment rules: moisture, packing and labels

Every AFI shipment needs an inspection before loading. Kernels must be free of live insects, hair, and hard or sharp objects. Harmless loose matter, such as threads, must remain under 0.01%. AFI allows kernel moisture of 3% to 5%. A lab dries a sample at 105 °C and weighs the water loss. Checks at the warehouse can spot damp packs, but only a lab reads the moisture figure.

Packers must use new, clean, dry, leakproof, lead-free containers with an airtight seal and no paper liners. Cartons must pass the 200-pound strength test and close without staples, unless the buyer asks for staples. AFI bars strong blocking, where kernels stick together and only a tool can free them.

Each carton label must show:

  • product name (cashews) and brand
  • producer or packer
  • grade
  • gross and net weight
  • country of origin
  • allergen marking
  • lot or date codes
  • any other marks the buyer and seller agree on

AFI puts storage life at about 24 months. Tree nuts store best at 0 to 10 °C and 55 to 70% humidity, AFI notes from University of California research.

The AFI roast test

Almost all cashews in US shops reach buyers roasted. The AFI roast test shows how a lot will look after roasting, and a contract may ask for it. Testers fry the kernels for 2 to 3 minutes in plain vegetable oil, such as peanut oil, at about 149 °C (300 to 310 °F).

Roast fault First Quality cap Second Quality cap
Spots after roasting 1.00% 2.50%
Scorched tips and colour change 2.00% No limit
Deeply scorched tips 1.00% 2.50%
Dark roast, light to medium brown 5.00% No limit
Deep roast, deep brown 2.00% 10.00%
Scrapes 10.00% No limit

In First Quality, roast faults other than scrapes may total 7% at most. AFI calls a roast uneven above 7% roast faults, above 10% scraped kernels, or above 15% for both together.

What happens when an AFI lot fails

AFI lists two fixes. Live insects in two or more cartons call for freezing the whole shipment at -18 °C for at least 21 days. Severe blocking in two or more cartons calls for about 21 days of freezing, then about 5 days in cold storage.

For a quality dispute, AFI offers arbitration, a hearing that settles the case outside court. Trade members hear the case without pay, and the losing side pays the fee. A case needs a signed contract with an AFI arbitration clause, or a form both sides sign.

Changes from the 2016 AFI text

The 2023 text replaced an older text. A copy of the older text, last revised on 28 July 2016, remains online on a Vietnam exporter site.

Point 2016 text 2023 text
Quality classes 7, with Blemished Wholes and Fourth Quality 6
Gas in the pack Food-grade carbon dioxide At least 60% carbon dioxide, with nitrogen for the rest
Lab tests for oil spoilage None Free fatty acids and peroxide value, two signs of stale oil
Carton label items 8 9, with allergen marking added
Taste test for chlorophenol, a chemical taint Yes Dropped

The old Fourth Quality held kernels that would pass as first or second quality apart from pitted spots. Some seller sheets still print it.

How AFI rules differ from Indian export grades

The AFI rules and the Indian export chart share the size names 240, 320 and 450, with the same counts per pound.

Point AFI 2023 Indian export chart
Broken kernels in whole grades Up to 10% Up to 5%
Smaller whole kernels Up to 10% Up to 5%, with SW in the same share
Moisture 3% to 5% Up to 5%
White class colours White, light yellow, pale ivory White, pale ivory, light ash
Size 180 count per pound 140 to 180 170 to 180
Size 210 count per pound 180 to 210 200 to 210

A W320 lot with 8% broken kernels passes the AFI limit and fails the Indian 5% limit. A lot of 150 kernels per pound meets AFI size 180 and misses the Indian W180 range.

Questions on the AFI cashew specification

Is the AFI cashew specification a US law?

No. AFI calls its standards industry-approved and separate from FDA Standards of Identity and USDA quality standards.

Does AFI have a W500 size?

No. AFI whole sizes end at 450. Some seller pages print a WW500 band under the AFI name, but the 2023 text holds no such size. The W500 Cashews entry names the grade lists with a 500 size.

Which buyers use the AFI cashew specification?

US importers. A CBI market report names AFI as the US industry standard and the UNECE standard as the most used one in Europe.

Sources and further reading

Related entries

Keep exploring